Bioreactor Vessel Hardware
Chemglass Life Sciences Adapter, Addition Pipe, M12, for 3-15L Bio Reactors
Adapter, Addition Pipe, M12, for 3-15L Bio Reactors. This adapter can be used to add fluids or gases to the bio reactor. The portion of the adapter that is within the reactor has a short drip tip tube that can accept tubing to reach further into the listed capacity reactor.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors.Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Chemglass Life Sciences Vessel, Bio Reactor, 6L, Low Profile, Graduated, 100-440 GPI Thread CN, (6) Vertical GL-45 SN's
Vessel has six vertical GL-45 threaded side necks and a 100mm threaded center neck.The 3 and 6 liter vessels are low profile to maximize incubator space.Supplied complete with (6) solid GL-45 caps and (6) pouring rings.
Chemglass Life Sciences Vessel, Bio Reactor, 15L, Graduated, 100-440 GPI Thread CN, (4) Vertical GL-45 SN's
Vessel has four vertical GL-45 threaded side necks and a 100mm threaded center neck.The 3 and 6 liter vessels are low profile to maximize incubator space.Supplied complete with (4) solid GL-45 caps and (4) pouring rings.
Chemglass Life Sciences 1L Unjacketed Bio Reactor Vessel
Vessels are constructed of heavy wall tubing and are graduated in 200mL subdivisions with numbers every 1000mL.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors.Applikon is a registered trademark of Applikon Biotechnology, Inc.Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Bellco Glass, Inc. 3/8" addition port assembly for 3, 7 and 10 liter bioreactor systems/vessels. English threads Fits .375" hole in headplate Dimensions: 2" oal Tube: 1/4" od x 5/32' id Material: SST 316l - ra 32 finish - inside & out With hose barb
3/8" addition port assembly for 3, 7 and 10 liter bioreactor systems/vessels. English threads Fits .375" hole in headplate Dimensions: 2" oal Tube: 1/4" od x 5/32' id Material: SST 316l - ra 32 finish - inside & out With hose barb
Bellco Glass, Inc. Headplate setup stand is for hands-free assembly of bioreactor head plates manufactured from aluminum and measures 8"x8"x3" assembled. Headplate is inserted into the slot on the stand and secured into place with thumbscrews. It holds any head plate up to
Headplate setup stand is for hands-free assembly of bioreactor head plates manufactured from aluminum and measures 8"x8"x3" assembled. Headplate is inserted into the slot on the stand and secured into place with thumbscrews. It holds any head plate up to
Bellco Glass, Inc. Manufactured from 316l stainless steel with ra32 finish or better inside and out. The assemblies attach to the headplate. Size: 3l Baffle shaft: .250" od x 6 1/4" long (1/4-28 tpi thread) Baffle plate: .625" od x 7" long x .090" thick Inse
Manufactured from 316l stainless steel with ra32 finish or better inside and out. The assemblies attach to the headplate. Size: 3l Baffle shaft: .250" od x 6 1/4" long (1/4-28 tpi thread) Baffle plate: .625" od x 7" long x .090" thick Inse
Bellco Glass, Inc. The 4-45 bioreactor vessel is manufactured from type 1 class a Borosilicate glass. This vessel has 4 sidearms around 100mm center neck. The stainless steel capseal has 5 ports for insertion of 12mm probes and 1/4" tubes. The vessel has an internal impelle
The 4-45 bioreactor vessel is manufactured from type 1 class a Borosilicate glass. This vessel has 4 sidearms around 100mm center neck. The stainless steel capseal has 5 ports for insertion of 12mm probes and 1/4" tubes. The vessel has an internal impelle
Bellco Glass, Inc. All port assemblies are manufactured from 316l stainless steel and have an electropolish finish. 2- port assemblies have siphon and vent tubes. 3-port assemblies have siphon, fill tube and vent tubes. All port assemblies include a 45mm blue polypropylene
All port assemblies are manufactured from 316l stainless steel and have an electropolish finish. 2- port assemblies have siphon and vent tubes. 3-port assemblies have siphon, fill tube and vent tubes. All port assemblies include a 45mm blue polypropylene
Bellco Glass, Inc. 200 mm large flange 0-ring for use with SST flange clamp. 200 mm 0-ring Red silicone rubber construction
200 mm large flange 0-ring for use with SST flange clamp. 200 mm 0-ring Red silicone rubber construction
Bellco Glass, Inc. The 4-45 bioreactor vessel is manufactured from type 1 class a Borosilicate glass. This vessel has 4 sidearms around 100mm center neck. The stainless steel capseal has 5 ports for insertion of 12mm probes and 1/4" tubes. The vessel has an internal impelle
The 4-45 bioreactor vessel is manufactured from type 1 class a Borosilicate glass. This vessel has 4 sidearms around 100mm center neck. The stainless steel capseal has 5 ports for insertion of 12mm probes and 1/4" tubes. The vessel has an internal impelle
Bellco Glass, Inc. Stainless steel port plug fits onto stainless steel head plate for 10 liter bioreactor vessel. 316l stainless steel with electropolish finish 1/2-20 tpi threads For 10l bioreactor systems - English threads For 1/2" port on headplate Su
Stainless steel port plug fits onto stainless steel head plate for 10 liter bioreactor vessel. 316l stainless steel with electropolish finish 1/2-20 tpi threads For 10l bioreactor systems - English threads For 1/2" port on headplate Su
Bellco Glass, Inc. 2-port 45mm cap assembly, 15lFor 15l 1964 style ohd vesselsLong tube: 1/4"od x 17 1/8"Short tube: 1/4"od x 2.156"All tubes extended up 1.0" above the cap slugSupply 45mm s/cap & white silicone liner
2-port 45mm cap assembly, 15lFor 15l 1964 style ohd vesselsLong tube: 1/4"od x 17 1/8"Short tube: 1/4"od x 2.156"All tubes extended up 1.0" above the cap slugSupply 45mm s/cap & white silicone liner
Bellco Glass, Inc. Manufactured from 316l stainless steel with ra32 finish or better inside and out. The assemblies attach to the headplate.
Manufactured from 316l stainless steel with ra32 finish or better inside and out. The assemblies attach to the headplate.